$8500 obo, 2012 900xp, I believe it is a 986cc big bore kit, wiesco high comp pistons, stage 2 hot cams, everything in the engine is brand new cept the cases, New hot rods crank, new hot rods connecting rods, new bearings, new rings, new cylinders, new timing chain and all new sliders with tensioner upgrade, new oil pump, the cylinder head was completely rebuilt with all brand new valves, sprin...
Condition: New Brand: Bryke Racing Size: 8-3/4 Manufacturer Part Number: 320-105L-8-3/4 Side: Drivers side Placement on Vehicle: Left, Front Material: Steel Auto Racing Part Type: Upper Control Arm UPC: Does Not Apply Upper Control Arm Small Ball Joint for more clearance Low Friction 8-3/4" Measure from center of rod ends to center of ball joint 9-1/2" wide Includes (2) 1/2" Chrome moly rod end...
Condition: New Brand: Bryke Racing Length: 8-3/4" Manufacturer Part Number: 320-105-8-3/4x2 Side: Left & RIght Placement on Vehicle: Left, Right, Front Material: Steel UPC: Does Not Apply Upper Control Arm Small Ball Joint for more clearance Low Friction 8-3/4" Measure from center of rod ends to center of ball joint 9-1/2" wide Includes (4) 1/2" Chrome moly rod ends Includeds adjusters on both ...
Condition: New Brand: Bryke Racing Length: 8-3/4" Manufacturer Part Number: 320-105R-8-3/4 Side: Passenger Side Placement on Vehicle: Right, Front Material: Steel UPC: Does Not Apply Upper Control Arm Small Ball Joint for more clearance Low Friction 8-3/4" Measure from center of rod ends to center of ball joint 9-1/2" wide Includes (2) 1/2" Chrome moly rod ends Includeds adjusters on both rod e...
Condition: New Manufacturer Part Number: 320-220 Auto Racing Part Type: Steering Placement on Vehicle: Left, Right, Front Product Type: Tie Rod Part Brand: Bryke Racing Special Features: Grease Zerk located on end Brand: Bryke Racing UPC: Does Not Apply Inner Tie Rod End Universal Taper Threads 5/8"-18 Left-Hand Thread Measures 4" Long from Center of Ball Joint to end of threads Special grease ...
Condition: New Manufacturer Part Number: 520-021 Product Type: Auto Racing Parts Part Brand: Bryke Racing Parts Brand: Bryke Racing Auto Racing Part Type: Carburator UPC: Does Not Apply Throttle Linkage Steel rods can be shortened and/or bent to fit your application. Quickly disconnects from carburetor and gas pedal. Zinc plated. 21" length Bryke Part# 520-021 or (479) 824-0966 Check out our ot...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-520-10 UPC: Does Not Apply Tapered Rod End Spacers 1/2" ID Bolt Size x 1/2" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding 10 pack Bryke Racing Part# 300-5...
Condition: New Brand: Bryke Racing Width: 3/4" Manufacturer Part Number: 300-540-10 Material: Steel ID: 1/2" Part Brand: Bryke Racing Parts UPC: Does Not Apply Tapered Rod End Spacers 1/2" ID Bolt Size x 3/4" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent bin...
Condition: New Brand: Bryke Racing Width: 3/4" Manufacturer Part Number: 300-545-5 Material: steel ID: 1/2" Part Brand: Bryke Racing Parts UPC: Does Not Apply Tapered Rod End Spacers 1/2" ID Bolt Size x 3/4" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent bind...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-640x10 UPC: Does Not Apply Tapered Rod End Spacers 3/4" ID Bolt Size x 1" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding Bryke Racing Part# 300-640x10 or (...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-640x5 UPC: Does Not Apply Tapered Rod End Spacers 3/4" ID Bolt Size x 1" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding Bryke Racing Part# 300-640x5 or (47...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-620-5 UPC: Does Not Apply Tapered Rod End Spacers 3/4" ID Bolt Size x 1/2" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding Bryke Racing Part# 300-620-5 or (...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-620-10 UPC: Does Not Apply Tapered Rod End Spacers 3/4" ID Bolt Size x 1/2" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding Bryke Racing Part# 300-620-10 or...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-610x10 UPC: Does Not Apply Tapered Rod End Spacers 3/4" ID Bolt Size x 1/4" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding 10 pack Bryke Racing Part# 300-6...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-610-5 UPC: Does Not Apply Tapered Rod End Spacers 3/4" ID Bolt Size x 1/4" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding Bryke Racing Part# 300-610-5 or (...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-630x10 UPC: Does Not Apply Tapered Rod End Spacers 3/4" ID Bolt Size x 3/4" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding Bryke Racing Part# 300-630x10 or...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-580-5 UPC: Does Not Apply Tapered Rod End Spacers 5/8" ID Bolt Size x 1/2" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding Bryke Racing Part# 300-580-5 or (...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-560-20 UPC: Does Not Apply Tapered Rod End Spacers 5/8" ID Bolt Size x 1/4" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding 20 pack Bryke Racing Part# 300-5...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-590-5 UPC: Does Not Apply Tapered Rod End Spacers 5/8" ID Bolt Size x 5/8" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding Bryke Racing Part# 300-590-5 or (...
Condition: New Part Brand: Bryke Racing Parts Brand: Bryke Racing Manufacturer Part Number: 300-580-20 UPC: Does Not Apply Tapered Rod End Spacers 5/8" ID Bolt Size x 1/2" L Spacers are used to center rod ends, coil-over shocks, tie rods, and radius rods in their mounts These spacers allow slightly more clearance for the shock mount or rod end to prevent binding Bryke Racing Part# 300-580-20 or...